We are absolutely OBSESSED with this Pretzel Marquee Light DIY project by Sam of Aww Sam. We’re also equally obsessed with her blog, so if you haven’t heard of her, do yourself a favour and check out her work ASAP! ‘Living in New York, I think it’s pretty much a requirement to love pretzels, and I’m definitely okay with pretzels and hot dogs being our associated foods,’ says Sam. ‘I’m 100% pretzels all the way, guys! (Especially when there’s chocolate involved too)…This was one of the easiest things to make, and it will leave you enough cash in your pocket to afford a real pretzel (unlike some of the other marquee lights on the market.) So let’s dig in!’

TIME

1.5 hours

SUITABLE FOR

Ages 14+

WHAT YOU’LL NEED

Foam core | Chip board or poster board | Olfa/exacto knife | Globe string lights 20 count | Hot glue gun | Spray paint in the colour of your choice (I used gold)

WHAT TO DO

  1. Start by tracing or drawing your image onto the foam core. Make sure you draw a large enough image based on the size of the lights you are using. The globe lights I bought were fairly large, so I ended up with a larger marquee light.
  2. Cut out the foam core using an exacto knife. You can cut out the circle holes for the lights with a knife as well or use a drill to make your life a little easier.
  3. Cut a 5″ wide strip out of your chip board or poster board long enough to wrap around the outside of the pretzel. Do the same for the three shapes on the inside as well.
  4. Hot glue the middle of the poster board strip along all open edges of the pretzel, making sure to crease the board in areas where there are corners.
  5. Once you have finished gluing all of the strips, you’re ready for spray paint.
  6. When the spray paint is dry, unscrew the bulbs of your string lights, placing them in the holes of the pretzel and carefully screwing them back into their sockets.

AND THEN

Hang and light up the room!

Project + Photography Sam Ushiro, Aww Sam